If Lexacom requires reinstallation following a PC replacement, system upgrade etc. it can be reinstalled free of charge by the Lexacom Helpdesk or via IT if confident to do so. PC Admin Rights will be needed in order to install Lexacom 3.

Please contact the Lexacom Helpdesk to ensure the most recent version of our Installer is being used by IT and consider the below details regarding your Lexacom Database

If the Installer is earlier than 3.10.6.0 Lexacom will not correctly update or benefit from subsequent feature development and important fixes.

STEP ONE – BEFORE YOU BEGIN

Before you begin the re-installation of Lexacom 3 onto a new desktop machine, you must first document the location of your dictation shared folder. We will need this location a little further along in the re-installation process.

If you already know the location of your Lexacom data folder, or if the site is using Lexacom Connect, move ahead to Step Two.

If you are unsure as to where this folder is, you can find the location from your old installation of Lexacom as follows –

• Go to MY COMPUTER and open WINDOWS EXPLORER
• Locate the address bar at the top of the window and enter the following dependent on your operating system
  • Windows 7/10 – C:\PROGRAMDATA\APROBRIUM\LEXACOM3
  • Windows XP – C:\DOCUMENTS AND SETTINGS\ALL USERS\APPLICATION DATA\APROBRIUM\LEXACOM3
• Within this folder you should see a file called LEXACOM3.CFG
• Double click that file and a dialog should appear stating “Windows can’t open this file”

• Choose to “Select a program from a list of installed programs”
• Select NOTEPAD from the list and click OK.
• The file will then open and display something to the effect of –

• You need to note down the location specified between the SERVERPATH tags
• In this case: \\SERVERNAMEHERE\DICTATION\LEXACOM
• This is the location we need after the Lexacom client is installed.

STEP TWO – INSTALLING THE CLIENT

After collecting the location of your dictation share, you will now need to install the Lexacom client software.

• Double click on the Lexacom Client Installer file.

• Click install to accept the default installation type.
• You will see the progress indicator move along and other windows open and close during the installation.
• Once complete, click CLOSE

• A new dialog will open called LEXACOM CONFIG
• Unless you have been instructed to configure differently – for example, if the site is using Lexacom Connect – select SINGLE SITE CONFIGURATION and in the second window, leave the APPLICATION MODE as WORKSTATION
• IF YOU ARE USING LEXACOM CONNECT PLEASE CONTACT THE LEXACOM HELPDESK REGARDING THE CONFIG
• Enter into the NDP field the location you noted down in STEP ONE
• Click SAVE & CLOSE

STEP THREE – GRANT LOCAL FOLDER PERMISSIONS

For Lexacom to run correctly, users require full control permission to certain local folders.

• Browse to C:\PROGRAMDATA\APROBRIUM
• Grant Full Control permission to Authenticated Users over this folder; if you are unfamiliar with the process of granting permissions:
  • Right-click on the folder
  • Go to Properties
  • Go to Security
  • Click Edit and then Add
  • Enter the security group Authenticated Users and click OK
  • Tick the Allow checkbox against Full Control
  • Click Apply and OK to all windows to save
• Repeat the process for C:\PROGRAM FILES\APROBRIUM

STEP FOUR – CONNECT HARDWARE AND TEST WORKING

• Connect any hardware, including microphones or footswitches, that you wish to use with Lexacom 3
• Run the Lexacom program and ensure that users can log into Lexacom and use the software as required

Congratulations! You have now re-installed Lexacom.